← Back to Knowledge Base
Data Center, Power & Racks
Racks, PDUs, UPS, cooling and containment, redundancy, and PUE. 88 guides.
- Battery Equalization and Maintenance: Extending Lead-Acid UPS Battery Life
- Battery String Configuration: 2N vs N+1 Redundancy in Mission-Critical Systems
- Brush Containment Blankets: Blocking Hot-Spot Air Leakage in Server Cabinets
- Cabinet Ventilation Audit: Identifying Airflow Blockages and Dead Zones
- Cable Length Limits in PDU Circuits: Voltage Drop Calculations for Distant Racks
- Cable management best practices for clean, serviceable racks
- Cable Management in High-Density Racks: Airflow Impact and Best Practices
- Cold Aisle Cable Management: Best Practices for Thermal Efficiency
- Cold-Aisle Containment Design: Best Practices for New Data Center Construction
- CyberPower Automatic Transfer Switches: Failover Protection Between Dual UPS Units
- CyberPower High-Temperature PDUs: Survival in Uncontrolled Server Room Conditions
- CyberPower PDU Selection Guide for Blade Server Environments
- CyberPower Rack Power Distribution: Vertical PDU Mounting for Space-Constrained Environments
- CyberPower Smart PDUs: Remote Power Monitoring for DCIM Integration
- CyberPower Switched PDUs: Outlet-Level Control for Blade Chassis Power Management
- Data center power: how to size a UPS and PDU for your racks
- Data Center UPS Sizing Calculator: kVA Requirements for Your Server Load
- Domestic Content Requirements: Steel and Aluminum in Data Center Rack Systems
- Economizer Modes and Free Cooling: Seasonal Cost Savings in Temperate Climates
- Firmware Updates for Intelligent PDUs: Remote Power Management and API Integration
- Generator-Ready UPS: Soft-Start and Frequency Coordination with Backup Power
- Harmonic Distortion Mitigation: Selecting UPS Units for Non-Linear Server Loads
- High-Voltage DC Power Systems: 380V HVDC vs 480V 3-Phase for Data Centers
- Hot-Aisle Containment ROI: Cooling Cost Reduction in Existing Server Rooms
- Hot-Swappable Battery Modules: Minimizing Downtime During UPS Maintenance
- How to choose a server rack: depth, U-height, and load ratings
- In-Cabinet Cooling Fans: Spot Cooling High-Heat Devices Without Major Retrofits
- In-Row Cooling Units vs CRAC Systems: Total Cost of Ownership Comparison
- Liquid Cooling Readiness: Preparing Your Data Center Infrastructure for Next-Generation Servers
- Lithium-Ion vs Lead-Acid UPS Batteries: Lifespan, Cost, and Safety Considerations
- Metered vs Switched vs Monitored PDUs: Which Intelligence Level Do You Need
- Metered, switched, and monitored PDUs compared
- Modular Data Center Cooling: Scaling CRAH and In-Row Units with Demand
- PDU Daisy-Chaining: When Serial Power Connections Work and When They Fail
- PDU Load Banking Standards: IEC 60309 vs NEMA L6-30 Outlet Configurations
- PDU Outlet Density: 20-Amp vs 30-Amp Circuits in Standard and High-Density Racks
- PDU Redundancy in N+1 Power Architectures: Dual-Corded Server Deployment
- Perforated Floor Tiles: Sizing and Placement for Optimal Cold-Aisle Delivery
- Phantom Load Reduction: Identifying Parasitic Power Consumption in Always-On Infrastructure
- Power Distribution Density: Calculating Watts Per RU for Your Applications
- Power Factor Correction: Understanding PFC Capacitors in UPS Input Stages
- Predictive Analytics for UPS Battery Health: Condition-Based Maintenance vs Calendar-Based
- Rack Door Perforations: Balancing Airflow with Physical Security
- Rack Elevation and Sloped Floors: Drainage and Thermal Stratification Considerations
- Rack PDU Circuit Breaker Types: Thermal-Magnetic vs Electronic Protection
- Rack-Level Power Budgeting: Real-Time Monitoring and Capacity Planning Software
- Rack-Mount PDU Placement: Top-of-Rack vs Mid-Rack vs Bottom-Rack Power Distribution
- Redundant Power Feeds: Single-Corded vs Dual-Corded Server Deployments
- Remote Hand Switch Technology: Managing Power Remotely in Attended Data Centers
- Segregation Standards for Power and Data Pathways per TIA-942
- Server Rack Height Standards: Understanding 42U, 45U, and 48U Cabinet Dimensions
- Server Rack Seismic Bracing: Meeting Structural Requirements in High-Risk Zones
- Server Rack Thermal Mapping: Using Temperature Monitoring to Optimize Airflow
- Single-phase vs. three-phase power in the data center
- Sumitomo Termination Boxes: Wall-Mount or Rack-Mount Options for Building Entrance Points
- Surge Protection and Transient Suppression: Protecting Rack-Mounted Equipment from Utility Faults
- Three-Phase vs Single-Phase UPS: Selecting the Right Power Distribution for Mid-Market Data Centers
- Transformer-Based vs Transformerless UPS: Efficiency and Harmonic Considerations
- Tripp Lite Battery Backup for Network Switches: Ensuring Graceful Shutdown During Power Loss
- Tripp Lite Metered PDU Outlets: Load Balancing Across Server Racks
- Tripp Lite Monitored Power Distribution: SNMPv3 Integration for Enterprise Network Management
- Tripp Lite NETSHELTER Rack Cooling: BTU Calculations for High-Density Deployments
- UPS Scalability: Modular Batteries vs Fixed Capacity Units for Growing Deployments
- Vertiv Chimney Containment Systems: Hot/Cold Aisle Separation for PUE Optimization
- Vertiv End-of-Life Support: Migrating Away from Legacy UPS Models
- Vertiv InRow Cooling: Precision Air Handling for Raised Floor Data Centers
- Vertiv Liebert UPS Systems: Sizing Your Power Backup for Mission-Critical Networks
- Vibration Isolation for Precision Cooling Equipment: Reducing Acoustic Noise and Thermal Stress
- ASHRAE TC 9.9 Thermal Guidelines for Data Centers
- ATS & Switchgear for Utility, Solar, and BESS Systems
- Bonding & Grounding for Data-Center Power: TN-S and ANSI/TIA-607
- Choosing a Data-Center UPS: Online Double-Conversion
- Cooling 60 kW+ GPU Racks: The New Power-Density Reality
- Cooling Data Centers in High-Ambient Climates Up to 45°C
- Data-Center Redundancy: N, N+1, and 2N Explained
- DCIM and BMS: Monitoring Power and Thermal in the Data Center
- Free Cooling & Economizers: Dry Coolers and Adiabatic Assist
- Hot & Cold Aisle Containment for High-Density Racks
- How Rear-Door Heat Exchangers Cool High-Density Racks
- Liquid Cooling Compared: Rear-Door, Direct-to-Chip & Immersion
- Liquid Cooling for AI & GPU Racks: CDUs and RDHx Guide
- Power Distribution Design for High-Density AI Data Centers
- Rack PDUs: Basic, Metered & Switched — A+B Feeds Explained
- Understanding PUE: Measuring & Improving Data-Center Efficiency
- UPS Battery Options: Lithium-Ion vs. VRLA for Data Centers
- Containerized & Modular Edge Data Centers: Design Guide
- Fire Protection for IT Equipment: NFPA 75 & NFPA 76
- Novec 1230 Clean-Agent Fire Suppression for Data Centers